Ph. (702) 873-6508 -- Fax. (702) 873-7519
03Feb12
THIS LIST IS CONSTANTLY BEING UPDATED AND PRESENTLY REPRESENTS
ABOUT 1/3 OF OUR INVENTORY. IF YOU DON'T SEE WHAT YOU WANT - CALL
AIR COMPRESSORS:
1 ea. New Apache AAC 250 Contractors
Air Compressor with Cast Iron V-Twin Pump, 7hp, 11 gal. tanks, 14.2 cfm, 125
psi, Serial No. A101200899...$1,500.00 
ANVILS:
See Forming Stakes/Holders
BAR FOLDERS:
1 ea. 36" Bar Folder with
Stand, Model No. 055E, 20GA, Serial No. 162-5-79, Late Model, Nice Condition...$2,450.00
1 ea 36" Pexto Bar Folder,
20GA, Model No. 055D, No Stand, Complete with Spring, 1 Hand Lever which can
use on left or right side, Mfg. Oct. 1939 (shown in picture on the right)...$1,450.00
1 ea. 30" Pexto Bar Folder,
Serial No. 631, Mfg. Apr. 1973, with Stand, Back Table, Never Broken...$1,100.00
1 ea. Pexto 30" Bar Folder,
Antique (1916), In Decent Shape...$600.00 
BEADERS/FLANGERS:
6 ea. New and Used Hand Beaders and Flangers, 24GA to 18GA, Lots of New and Used Wheels or Dies for these Beaders, Some new ones have 18" Throat Models...Pexto, Roper Whitney, Williams
1 ea. Niagra 147 Beader...$495.00
BENDERS:
BENDERS, CONDUIT, TUBING AND PIPE:
1 ea.
Hy-Pro Bender (for roll cages, corrals, and other ideas) New Tubing and 
BEVELERS:
Currently none in stock - but available in 3 days
BOXES GEAR:
2 ea. 5hp, Variable Speed Gear Drives...$200.00 ea
Lesson Drive Motors, 1/2hp,
1625/1350rpm, 115v, 1ph, 60/50hz, Instant Reversing, Model M4P17DC7F, Cat
No. 100704.00. We have a total of 5. 2 at 100% complete for $500.00 each.
2 at 95% complete for $450.00 each. 1 at 85% complete for $400.00. We believe
these are used for security gates. 60lbs. Each 20 X 10 X 12. 
BRAKES HAND:
4 ea. New Roper Whitney 10' 16ga Brake, Not Including Incoming Freight...$6,400.00
1 ea. Used Roper Whitney Brake
10' 16ga, Serial No. 2364-4-97, Complete with Nose Angle, (Cons.; Bay E)...$3,500.00
1 ea. New Roper Whitney U416
16ga Box and Pan Brake, Serial No. 6302-6-09, Not Including Incoming Freight
or Stand...$1,800.00 
2 ea. New Roper Whitney 10'
18ga Brake, Not Including Incoming Freight...$5,350.00 
2 ea. New Roper Whitney 8'
16ga Brake, Not Including Incoming Freight...$4,400.00 
1 ea. New Roper Whitney U218, Serial No. 829-04-03, 24", 18ga...$950.00
1 ea. New Roper Whitney U422 Finger Brake, Serial No. 7844-5-09, Not Including Incoming Freight or Stand, 280lbs...$1,060.00
1 ea. New Roper Whitney S422 Straight Brake, 4' 22ga, Serial No. 3546-08-06, Not Including Incoming Freight, 210lbs....$850.00
1 ea. New Roper Whitney #99 Letter Brake, 235lbs....$2,354.00
1 ea. New Tennsmith 8' 12ga
Hand Brake, Model No. HB-97-12, Serial No. 07508, Not Including Incoming Freight,
(Bay A)...$6,900.00 
1 ea. New Tennsmith 6' 16ga Hand Finger Brake, Model No. HBT-72-16, Serial No. 07407, Does Reverse Bends, Bottom Fingers Come Out, Not Including Incoming Freight, Shipping weight 2,250lbs...$6,700.00
ALWAYS STOCKING NEW ROPER WHITNEY HAND BRAKES
BRAKES PRESS:
1 ea. Roper Whitney Auto Brake
10 X 14 ga. Kombi beam with the Orion
1 ea. Cincinnati 12' Press
Brake, 10' 6" between housing, #5, SN 35746, Series 5, 3" stroke,
90 ton midstroke, 135 ton bottom, power ram adjustment, hand crank lube, 41/2"
thick die block, air clutch, flush floor, 1ea 12' 1 1/2 thick 90 degree punch
& die to match and 12' x 3/8 die...loaded on truck...$17,500.00 
1 ea. Used DiAcro Press Brake, Model No. 14-48-2, Serial No. 6821178405,
Capacity 17 Ton, 2 Axis Manual Back Gauge, 230Volt, 3 Phase, Dual Speed Pump,
3HP Motor, (Cons. JC)...$5,500.00 
BUFFERS:
1 ea. Used Buffer, first portion
of left spindle is 12" with an OD of 2.425", second portion of left spindle
with threading is 7.5" with an OD is 1.235"; first portion of right spindle
is 12.5" with an
OD is 2.425", second portion of right spindle with threading is 8-1/4 with
an OD of 1.235", 7.5hp Dayton Motor, 3 Phase...$400.00 
1 ea. Used Buffer, first portion
of left spindle is 3.5" with an OD of 2.435", second portion of spindle is
3" with an OD of 2.559", third portion of the spindle with threading is 8"
with an OD of 1.246", 7.5hp Lincoln A.C. Motor, 3 Phase...$400.00 
1 ea. Used Buffer, first portion
of left spindle is 4" with an OD of 2.421", second portion of spindle is 3-3/4"
with an OD of 2.113", third portion of spindle with threading is 11-1/4" with
an OD of 1.456"; first portion of the right spindle is 7-3/4" with an OD of
2.421", second portion of the spindle is 3-3/4" with an OD of 2.113", third
portion of spindle with threading is 5" with an OD of 1.456", Due to position
of motor and location of plate we can't determine motor type or horse power
but looks like it may be 5HP...$400.00 
1ea Used Buffer, first portion
of the left spindle is 10" with an OD of 1.788", second portion of spindle
with threading is 7" with an OD of 1.001", first portion of the right spindle
is 8-3/4" with an OD of 1.788", second portion of spindle with threading is
7" with an OD of 1.001", Due to position of motor and location of plate we
can't determine motor type or horse power but looks like it may be 3HP...$400.00
2 ea. Used Back Stand Idlers...$150.00ea
COLLAR MAKERS:
CLEAT FORMERS:
CLINCHERS:
DEBURRING MACHINES:
1 ea Falls De-bur-r Model
121,deburrs both sides at same time...$1,775.00 
DIE CUTTING PRESSES:
DRILL PRESSES (BELT-DRIVEN):
1 ea. Old Heavy Duty Antique
Buffalo Type #4 mt. Power down Drill, Totally 
1 ea. New Acra floor MD-32MMF
model drill press #4 mt, 1 hp single phase motor, 
1 ea. New Rong Fu Vari-Speed
Floor Drill, #3 mt., 1-1/2 hp. 3-phase, 300 to 2000 
1 ea. (New) King (Short) Floor
Drills, 5 bearing spindle, 
1 ea. Rockwell Unidrill Head
Moves all Directions, 1/2 Chuck,
FEEDERS:
1 ea. Benchmaster Stock Feeder,
use with Punch Press, Feeds material in to be punch or formed...$300.00
FORKLIFTS:
1 ea. Allis Chalmers, Model
No. FL120-24-2PS, Serial No. 52072000, Capacity 12,000lbs (Capacity 17,000lbs
with 3,000lb Counter-Weight), Lift 8' to 9', ...$5,500.00 
1 ea. Clark, Model No. C500
S30, Serial No. 235-1546-2835, Capacity 5,000lbs, Lift 15' (Cons. Bobby)...$4,500.00
1 ea. Nissan, Model No. NF01
M15, Serial No. NF01-024268, Capacity 3,000lbs, Lift 94", (@ JDH)...$3,000.00
1 ea. Towmotor, Model No. 670LP,
Serial No. 670600044, Capacity 12,000lbs, Lift 15', Over-Hauled, Runs Great,
7' Wide Mast with Side Shift...$7,000.00 
1 ea. Toyota, Model No. 42-4FGC25, Serial No. 404FGC25-17227, Capacity 5,000lbs, Lift 12', (Cons. PI)...$5,000.00
FORMING STAKES/HOLDERS:
Lots of Roper Whitney Forming
Stakes (Anvils), Bench Plates and Stake Holders. Approximately 30 pieces.
Call for pricing and availability. 
GENERATORS:
1 ea. New Apache ADG 8500 Diesel
Generator, Remote start and shut-off, 4 Stroke, Air-Cooled, Direct Injection,
Diesel Engine, SUPER-QUIET Noise Level 78dB, 2-120/240 Volts, Automatic Idle
Control, Serial No. F1012188592...$3,700.00 
1 ea. New Apache AGG 8800E
Gas Generator, Forced Air Cooled 4 Stroke OHV 110, 120, 240 Volt, Key Start,
Serial No. A1012002716...$1,350that.00 
1 ea. CAT 4 Cyl Diesel, #K6111,
call for info...$6,500.00 
1 ea. New Miti-Quip Industrial
DG5500 Diesel Power Generator Model No. 178F, Serial No. CG74103016, D.O.M.
10/2004, 4.5KW@3600RPM, Used for only 3 Hours, comes with cover and took kit...$2,500.00
GRINDERS:
1 ea. Cuttermaster Grinder with Extra Cup Wheels, Set of 5C Collets in
1/16 OD Increments, with Stand, Excellent Condition, Diamond Dresser, Diamond
Cup Wheel, Model No. MG-30, Serial No. 5163...$3,750.00 
GRINDERS DRILL BIT:
1 ea. Used Sterling Drill Bit
Grinder, Model DB, Tooled Up To 2-1/4"...$1,295.00 
1 ea. New Champ Drill Bit Grinder,
Tooled Up To 2-1/4" Drill Bits, Includes Split Points, 2 Extra Grinding
Wheels, Stand with Shelves...$2,495.00 
1 ea. Used 80-M Model TDR/SRD
Drill Grinder...$750.00 
GRINDERS SURFACE:
1 ea. Boyar Schultz Surface
Grinder 1 1/2 hp. 3 ph. 1750 RPM w/ Magna lock 6" X 18" magnetic chuck, (Bay
E)...$1,250.00 
GRINDERS TOOL and PUNCH:
HOT STAMPERS:
1 ea. Franklin Hot stamping
press call for details and price.
IRONWORKERS:
1 ea. Mubea Mechanical Ironworker,
21 Ton, Size BF 10 F, Serial No. 163|30944|23, Round Holes...1 1/4" in
3/16" & 9/16" in 7/16", Number of Strokes Per Minute...72,
Depth of the Throat...2", Plate Shear...6"x 5/16", Angles...3x3x5/16"@
90A degree 2x2x4 1/4"@ 45A degree, Round Bar & Square Bar...1 3/32",
Channel...2 3/4"x 1/2"x 6"@ 90A degree, Totally Reconditioned...$3,750.00
1 ea. Used Uni-Hydro 19 Ton
Hydraulic Ironworker, 3 Phase, 3in x 3in Angle Iron, 6-7in Flat Shear, 4-1/4in
Throat Punch, 2in OD Die, 2in OD Punch...$1,850.00 
1 ea. Kingsland Hydraulic Ironworker
Serial No. 810898, Model No. 60XS, 60 Ton, Made in England. Uses F26 and F62
Punches and Dies. 8 sets of shapes re-sharpened and 14 sets of rounds re-sharpened,
has 3 other punch and die attachments, (Cons. PI)...$7,500.00 
LATHES:
1 ea. Tarnow Universal Lathe
TUJ-48 32" Swing in the gap, 8.5" Centers, 22 to 1120 rpm, 16 speeds,
12.5" 3 Jaw Chuck with Top Reversable Jaws, Camlock Chuck Mount, 2"
Spindle Hole, Loris #200 Quick Change Tool Post 6 Piece with Cut-Off and Boring
Bar, One Steady Rest, 2 Follow Rests, delivered locally...$7,500.00
1 ea. Hardinge Turret Lathe with Threading Attachment...$1,500.00
1 ea. Lathe Chuck, Rotated by Air Motor and Gear Reduction, Believed to be a Rotating Welding Fixture, Heavy Adjustable Height Stand...$650.00
1 ea. Used 1940's Craftsman
12x24 Lathe Made by Atlas, Excellent Condition, 12" Swing, 24" Centers,
8 Speed Transmission Housed in Original Steel Stand with Single Phase Motor,
3 and 4 Jaw Chucks Screw on Spindle, 1/2" Jacobs Drill Chuck, Live Center,
New USA made Quick Change Tool Post with 5 Holders including Cut-Off Bit and
Small Boring Bar. This 1940's Lathe came out of the basement of a major casino.
It appears they used it less than ten times...$2,550.00 
1 ea. Reconditioned 16" Swing 6' Centers Antique South Bend, 1 Phase Motor, 7.5" 3 Jaw Chuck, Steady Rest. No tool post but we will through in an antique style tool post for free. We may have some change gears also. This lathe is an old loose change lathe. Previous owner spent two years fixing it. It is good enough to make Nascar parts. Price delivered locally under normal conditions...$2,250.00
1 ea. Hardinge Lathe, Model
HCT (Hardinge Chucker Turret), 440 Volts, 3 Phase, 1 HP, Threading Attachment,
Lever Acting Collet Closer, Serial No. HC3279, Very Accurate Spindle, Good
"Buy" for a Quality USA Lathe...$1,200.00 
1 ea. Used Cincinnati 13x40
Tray Top Lathe with 12 Speed 45 to 1800rpm, L Back, 3 and 4 Jaw Chucks, Trav
Dial, Regular Tail Stock and Additional 6 Position Bed Turret, With 5C Collet
Closer, Tool Post Extra...$2,000.00 
1 ea. Used Profitmaster 15"
Swing 60" Centers, Has Inch/Metric Dials, Yuasa Quick Change Tool Post,
10" 3 Jaw Chuck with Top Reversable Jaws, Large Face Plate, Large Steady
Rest, Follow Rest, Ways are Excellent. Was bought new and only used to make
prototype for less than 2 years. Has Change Gears, 45 to 1120rpm, Does Inch
and Metric...$4,750.00 
1 ea. Used Lodge & Shipley
18.5" Swing x 80" Centers, 12" 3 Jaw Chuck with Top Reversable
Jaws, 2" Spindle Hole, 24 Speeds 21 to 1740 rpm Camlock Spindle, Taper
Attachment, Reversable Ways, Has 4 noisy gears around 440 to 560 rpm...$6,750.00
1 ea. Used Rockwell 11"
Swing, 3 and 4 Jaw Chucks, Taper Attachment, American Made Quick Change Tool
Post with 5 Tool Holders and Cut-Off Tool, Steady Rest, Nice Steel Stand with
Swing Open Doors, 40" Centers...$2,750.00 
LIFTS:
1 ea. Economy Lift, Model No.
20-32, Serial No. KL 80267, Capacity 800lbs, Lift 20'...$750.00 
MILLING MACHINES VERTICAL:
1 ea. RB1 1990's Vertical
Bed Mill, R-8, 9" x 42" Table, DRO, Servo on X-Axis, Chrome Ways, Vari-Speed,
Head Powers Up & Down as does the Spindle & Swivels side to side, one shot
lube, Double locks every where, was Over $12,000 new. Only used 1-1/2 years
since new. Very Nice...$6,995.00 
1 ea. Linley Jig Bore Milling
Machine, Single Phase, Table is 7 inch x 17.5 inch...$995.00
1 ea. Lagun-FT-1 Vertical Mill Belt Head 9" x 42" Table, Chrome Ways, 2 Axis Digital Read Out on X and Y, 6" Mill Vise with Swival Base, R-8 Collet, Clamp Set, Free Local Delivery…$3,750.00
1 ea. Supermax Mill 9" x 48" Table, 21.5 Inch Wide Saddle, Servo Power Feed on "X", 2 Axis Digital Read Out, "Uniq" #SOS2MS, Serial No. 85-0315597, Chrome Ways, Variable Speed Head 60-500 Low, 500 to 4200 High Speed, Table Excellent, Double Locks, One Shot Lube, Collet Holder…$5,000.00
1 ea. Acra Vertical Mill 9" x 49" Table, Model No. AM2AC, Baldor Motor, Electronic Variable Speed, Serial No. 0503276, 0-575 Low Range, 0-5000 RPM High Range, Heavy Duty Alien Power Feed on "X", Front and Rear Way Covers, Double Locks, Chrome Quill Class 7 Spindle Bearings - All Handles…$6,500.00
1 ea. Tree Vertical Mill 10.5"
x 42" Table, Power Feed on "X" Travel, Tight X and Y Screws, Variable Speed
Head, 60-420 rpm and 450-3300 rpm, 2 ¾ Inch Power Down Feed, 5 Table X Travel
Feeds, Full Set of Tree Collets, 1/2hp Power Feed, 220/440V, Wired 230V, Approx.
1000lb...$3,250.00 
1 ea. Acra Mill Model MMD-45,
Serial No. 0097 Date 2005, Heavy Steel Stand, 9.5" x 31" Table, Table Swivels
15 degrees and Head Swivels 15 degrees, 6" Down Travel, Instant Spindle Reverse,
Has Tapping Mode, 12 Speed, 95-1500 and 190-3000rpm, 16" Table Travel…$1,750.00
1ea. Acra Vertical Mill, “Like New”, Model No. AM2 AC, Serial No. 0609805,
220V, 3PH, 3 Phase, 9” x 49” Table, Fully Tooled, 2 Axis Newall Digital Read
Out, 6” Swivel Vise, Electronic Variable Speed Drive 25-500, 250-5000rpm,
No Power Feed on “X”, Chrome Ways, Clamp Set, Collets, Double Locks, 1-Shot
Lube, 3 Power Down Feeds, 20 Piece End Mill Set, Made in Taiwan....$9,500.00
1ea. Used Lagun Vertical Mill, Serial No. 14658, 9” x 42” Table, Power
Feed on “X” Travel, 2 Axis Anilam Digital Read Out Micro Wizard, 6” Swivel
Vise, Variable Speed Head with 3 Down Feed Rates, 1-Shot Lube System, All
Handles, Ways Very Good, Replacement New $10-$12k....$5,000.00 
MISC:
1 ea. T-Drill with Milwaukee
Motor, Very handy for Plumbers...$950.00 
1 ea. 4' X 7' Welding Table< Light Top with Large Wheels...$150.00
6 ea. 4' X 10' Well Built Work Tables, Cheaper than you can make them, 3 with wheels...$125.00 or 3 without wheels...$75.00
1 ea. Yale Industrial Battery Charger, Model No. 3YTF6-550, A.T. Bat.
510, Type Bat. L-A, Input Volts 208/480, Input Amps 5/2.5, Cells 6, Max Amps
122, HZ 60, Phase 3, Serial No. 83696-YYW...$350.00 
1 ea. Duro Dyne Liner Sizer, Model No. LS-5, Serial No. 3693...$3,500.00
1 ea. New 1".20 Carburetor Repair Kit for Repair of Damaged Fuel Inlet Thread Heli-Coil Kit No. 4999.16, Master Thread Repair Pack...$95.00
1 ea. large lot of Uni-Punches different widths and throat depths with tooling
1 ea. 20X Lens for a PC-14C Optical Comparator, Original Cost $500.00,
Selling for....$125.00 
1 ea. Barshop, Model-Pro, Serial
No. 4877, 1977 Model, Doeer Motor, 3/4hp, 60hz, 1 Phase, 115/230Volts, 8.2/4.1amps,
KN Type, K56Y-Frame, 3,450 max rpm, Motor Ref #604124-A77-2, Machine is used
to repair and recondition chainsaw bars and processor bars. It can also be
used as a grinder and sander...$1,100.00 
Lesson Drive Motors, 1/2hp,
1625/1350rpm, 115v, 1ph, 60/50hz, Instant Reversing, Model M4P17DC7F, Cat
No. 100704.00. We have a total of 5. 2 at 100% complete for $500.00 each.
2 at 95% complete for $450.00 each. 1 at 85% complete for $400.00. We believe
these are used for security gates. 60lbs. Each 20 X 10 X 12.
NIBBLERS:
1 ea. Trumpf & Company
Hand Nibbling Machine B600, cuts up to 1/4" plate, Type THMB600, 110
Volt, 1800 Watts, 17 Amps, 470 strokes per minute, Made in Germany, Works
Great...$1,200.00 
NOTCHERS DUCT:
NOTCHERS HAND:
1 ea. Used Roper Whitney 100
box flange notcher 16-20ga. $750 
1 ea. New Roper Whitney PS 66, heavy unit does 16 ga. 6" 90 degree cut. (We have 3 of these used)
NOTCHERS POWER:
1 ea. New Ruoff Notcher (used in making letters for signs). Normally in stock. Occasionally we have a used one avail.
NOTCHERS TUBE:
1 ea. Vogel Hand Tube Notcher, Some Used and Some New Dies on a Stand.
OPTICS SHOP:
1 ea. Strasbaugh 1986 Curve
Generator with Automatic Controls, Grinds Optics in a Curve or Arc, New $28,000...$4,950.00
OVENS:
All sizes available in static boxes or rotory phase boxes. 1/3 hp to 50hp. Up to 10 hp in stock.
1 ea. New 5 hp. Phase-a-matic Roto Phase In Stock.
1 ea. Phase-A-Matic 10hp Rotary
Phase Converter, Model No. R10, Serial No. FB59, Cost of new one is $1,550.00,
Our cost used...$1,100.00 
PIPE THREADERS:
1ea. Ridgid 400A Power Threader, Ridgid #28 Vise, USA 4-1/2” Smooth Jaw
Vise, 10” Swivel and Straight Wheels on Cabinet, Towable from Ends, 8 Die
Heads Different Sizes, Reamer, Handles, Good Shape, 120” Long with Tow Bars
Out, 40” Side at Vise, 30” Wide Table, New Cord, 115V, Originally from Douglas
Aircraft, Opens 2-3/8” on Power Head, 12 Drawer Cabinet, (we have a 2 legged
Victaulic Machine that you use with a Ridgid Power Head and it crimps sprinkler
pipe-additional price of $500.00)...$1,800.00 
PLASMA CUTTERS:
1 ea. Linde Model PCM-31 Plasma Cutter...call for pricing
1ea. Hypertherm Max20 Plasma Arc Cutting System...call for pricing
POTTERY EQUIP:
PRESSURE WASHER:
1 ea. New Apached AGPW 3000
7HP Pressure Washer, Serial No. 461010209...$475.00 
PRESSES PUNCH:
1 ea. Bench Master 5-Ton Punch,
with 5 Inch Wide Stock Power Feeder, Vari-Speed Drive, Stand, Dies, 1990's,
Runs Good, DC Set-Up...$1,000.00 (or $1,300.00 with extra Feeder) 
1 ea. Federal Punch Press,
Model F4, 46 Capacity Ton, 3 Stroke, 10-1/4 Inch Die Space, 14-3/4 Inch X
27 Inch Bed Space, 8 Inch Throat Depth, 120 Strokes Per Minute, 2-1/2 Ram
Adj., 1 Phase, Date 12-65, Serial No. 4-1900...$2,500.00 
1 ea. Kenco 4 Ton Punch Press, Model No. 4 1-1/4, Serial No. 883-254,
General Electric 1/2HP Motor, 115/230V...$1,100.00 
1 ea. Thor 6 Ton Air Power
12 Station with Stylist Table, Like New, Works Good, $9,000.00 New, Our Price...$3,500.00
1 ea. Coin Minting Punch Press,
5 to 7.5 ton, Counter, Fuse Box, Mag Start, Belt Guards, Estimate 1"
Stroke, 1HP Motor, 220/440V with Feeder, Approximate Weight 500lbs, In Good
Running Condition...$500.00 
PUNCH & DIES:
1 ea. New 4", 5"
and 6" Punches, 4", 5" and 6" Dies, Punch Stems have a
2" Outside Diameter, the Dies have a 8" Outside Diameter, 4"
Set is $245.00, 5" Set is $525.00, 6" Set is $885.00, Cost if Sold
Separately 4" Punch $130.00, 4" Die $115.00; 5" Punch $270.00,
5" Die $255.00; 6" Punch $450.00, 6" Die $435.00 
PUNCHES HAND/KICK:
1 ea. Roper Whitney punch with
dies and punches. 
6 ea. Hand and kick punches
by Whitney Jensen or Roper Whitney, 18 and 24
2 ea. (New) Roper Whitney Ratcheting 20-Ton Hand Punches. With tooling up to 13/16 punches.
1 ea. Roper Whitney Pexto foot
punch, 18" throat, Model 58, Serial No. 4324-6-97, 5 ton, soft steel...$1,300.00
We Stock 90% of all New Roper Whitney models of hand punches and tooling to match, Including Models: #5 Jr., XX, #7, #8, #10, #12, #20, #16, #17, #218, plus more.
PUNCHES POWER:
1 ea. 50 Ton W/A Whitney Hydraulic Punch with Power Pack, Rebuilt with New Tooling
1 ea. Diacro Air Ram Punch
with Foot Control, Stand and Box of Tooling (additional $295.00 for Tooling)...$1,895.00
1 ea. 30 Ton WA Whitney Hydraulic
I Beam Punch with a Set of
1 ea. Nitto Selferace 52 ton
punch 4 1/2" throat. 1 1/16 in 5/8 steel 
1 ea. WA Whitney #635, 30 ton
hyd. punch with hydraulic clamping, 
RIVETERS:
ROLLS POWER:
1 ea. New Tennsmith 50"X 16 ga. available
1 ea. Pexto 30" power
roll, missing one gear, selling for ALL parts, 3/4 HP, 175 rpm, 3 phase, 220/440,
we will deliver if within 500 miles of Las Vegas, Nevada...$1,000.00
1 ea. Promocut RBM-2-30MP Angle
Roll, Serial No. AM 3007...$3,000.00 
ROLLS SLIP:
Numerous Used slip rolls, Stk#
6092802,3,4 Call for details 
1 ea. New 24 Inch 20ga Tennsmith hand powered
1 ea. New 36 Inch 22ga Roper Whitney hand powered
1 ea. New 50 Inch 18ga Acra, Hand only, We Rep Roper Whitney, Acra, and several others. Large sizes available.
1 ea. New 48 Inch 18ga Roper
Whitney Roll Bending Machine Model No. 418 on a stand that has a 1 inch thick
aluminum top supporting the roll, weighs 800lbs...$5,000 (machine only),
$5,500 (with stand) 
ROLLFORMERS:
1 ea. New Flagler Quad Machine
for "S" & Drives in the center and Male and Female Button Lock on the outboards.
20 to 28 ga. - In Stock 0808 This is the
Purple Machine. More on
New 20 ga. male and female Flagler button lock 10 shift 2 station
1 ea. 20 ga.Flagler rollformer
pittsburgh and ? Call 
1 ea. Used 20ga. Pittsburgh/Being Reconditioned
1 ea. Lockformer 7 shaft 18 ga. Pittsburg reconditioned, 3 phase. $ 4,500.00
1 ea. Flagler Quadformer 230
vac 1 ph w/cleat and 1 1/8' drive cleat roll and 24 ga quad cutter slitting
attachment $18,150 
1 ea. Lockformer 20ga. 9 shaft
Call 
1 ea. Flagler 24 ga. Pittsburg
1/2 hp w/power flanger on top call for details and pricing 
1 ea. Flagler, Reconditioned
7 shaft, 1/2X 16 ga. Pittsburg with 3/4standing seam on opposite side. Very
nice low usage government machine, 3 hp 3 phase with
Note: For the 7 & 9 station Lockformer Rollformers we have the following sets of rolls for 1/2 price of new. Drive Cleat, Acme (double seam), 5/16 Pittsburg, and 20 ga. Right Angle Flange.
Note:
Reconditioned means the whole machine was totally dismantled, washed and
ROUTERS:
1 ea. CNC 5'X10' Aronson Router
w/ micro path controller, single head,
SANDERS BELT:
2 ea. New 6 x 48 Kalamazoo
(Powerful) Belt Sanders, (1) 5-hp. 1-phase $ 1,795.00 
1 ea. 5-hp. 3-phase. With stands.--- $ 1,565.00 These are discounted prices.
1 ea. New Kama Combo 14 Disk
and 6 X 60 Belt Sanders and a 20 Disk Sander.
1 ea. New Burr King 482 single
phase.
1 ea. Kalamazoo S272 and the
same with a stand both single phase.
2 ea. Kalamazoo 1-SM 1"x 42"and
2ea. 2"x 48".
1 ea. Kalamazoo BG260S 2"x 60" with stand
SAWS CHOP:
1 ea. 14"-16" Everett
Abrasive Power Down Chop Saw, Model No. 14-16, Hydraulic Power Head, TEFC
10HP Motor, Magnetic Starter, Cabinet Base, Double Action Air Vise...$5,750.00
1 ea. Emerson 8 Abrasive Chop Saw
1 ea. Everett, Dust Collector, Magnetic Starter, 5HP...$1,295.00
SAWS COLD:
1 ea. Trennjagger 14" mitering,
power head, quality made German saw. Rebuilt Trans,
S1053 SAWS MITRE:
1 ea. New Acra 350 14"blade mitering cold saw double vise call for details
1 ea. KAMA Mitering Band Saw,
New, Model 90, 6" capacity miters left and right 45 and 60 degrees, 6" capacity,
table model, drry cutter at a very reasonable price of $1595 plus incoming
freight...
1 ea. KAMA Mitering Band Saw, Model 96 is the very popular 6" 60 degree single mitering saw on stand 1 or 3 ph with coolant and one year warranty only $2575 plus incoming freight with Free extra 2 M42 blades and gallon of concentrated coolant.
We also have the Yellow Kama same specs as the others with power down feed. All Saws available in 115 volts single phase.
We have new ones Demo ones and Rebuilt ones at a lesser price. We also have the little portable one that miters and has a 4" mitering cutting capacity.
We stock quality 5/8 6/10, 8/12, 10/14 and 14/18 tooth cobalt blades at all times and Sell 2 coolants "Premium Poly Cut" (included with saws) and "Prolong" the best we have tested.
1 ea. FMB Double Mitering Orion saw 110v 1ph. 60 deg rt. 45 deg lt call
1 ea. FMB single mitre Titan 9 1/2" sq. cap @ 90 deg 3 ph gravity feed vari-speed call
1 ea. New Acra 10" X 18" 2 hp miter saw gravity feed vari-speed 104-377 fpm call
SAWS POWER HACK:
SAWS HORIZONTAL:
We Rep Kama, FMB, Phoenix,Wells, Kalamazoo, Clausing, Acra, Dake, Roll-In and other Saws.
1 ea. 9" x 15" Horizontal Mitering Bandsaw, 220 VAC, 1 Phase, Very New Condition, Import, Will include 2 Extra Cobalt Blades and a Gallon of Water Soluable Prolong Coolant...$3750 (K4111)
SAWS VERTICAL:
1 ea. Used 26” Throat Doall Vertical Bandsaw, 12” High...$2,500.00
1 ea. Used 36” Throat Doall Vertical Bandsaw, 10” High, Power Table...$3,500.00
1 ea. Used 30” Throat Startrite Vertical Bandsaw, 10” High, Model No.
30-R-10, Blower, Crank...$2,750.00
1 ea. Used 36" Throat Tannewitz Vertical Bandsaw...$4,500.00
1 ea. Lockformer 24S Vertical
Band Saw, 24" Throat, 4' Square Table, Carbide Guides, 115V, 1 Phase...$3,500.00
SHEARS AIR:
1 ea. Wysong 4 ft 16 ga w/ front arms and manual backguage being reconditioned Call
SHEARS CIRCLE:
1 ea. New Roper Whitney 52" 16ga Foot Shears are $3,550.00. And Now Only Come With Back Gauge. Front Arms and Front Gauging and Misc. is an Extra $550.00 plus Frt. The Shear is 1,000lbs and Frt. $225.00.
SHEARS HAND:
3 ea. Powered hand shears, 1 Fenway 1/4" cut $ 995.00 sells new $3000
1 ea. Malco unistrut shear
$195 
New and Used Hand power shears Bosch nibbler, Stanley shear, New Trumph, used chicago shear
S4104 SHEARS:
More to come.......
Note: We stock 45 different machines and hand tools made by Roper Whitney.
SHEARS POWER:
1 ea. Niagara One Series Power
Shear, Serial No. 54283, 3', 14ga, 1.5hp, 3 Phase Motor, 240volt...$3,750.00
1 ea. Niagara 52" 10ga Power Shear "Niagara 1R-4-10GA", Serial No. 62931, Manual Crank Back Gauge with Digital Read Out and 80" Squaring Arm with Table Included. It uses 8' Square Area and Weighs about 5,000lbs & Gears Run in Oil Bath. In Excellent Condition (Cons. JDH)...$6,595.00
1 ea. Famco 53" Blades, 14ga capacity, no Back Gauge, 2 Front Arms, 3 Phase Motor, looks like 3hp, 240volt..
1 ea. Tennsmith Used 10' x
10ga Power Shear wired 230volts, 3 Phase, Model LM1010, has Rear Return Air
Operated Sheet Support System, 6' Squaring arm and 2 Support Arms, 30"
Quick Operating Back Gauge with Electronic Digital Read Out, Has Cut Less
than 40 Cuts since New, Serial No. 07605...$19,500.00 
SLITTERS:
1 ea. Wilder Workhorse Slitter
Model 2024, Serial No. 48604, 20 GA, Mild Steel, 110V, 1 Phase, with Stand,
(Bay B)...$2,695.00 plus $295.00 freight 
SURFACE PLATES:
1 ea. Grey Granite Surface
Plate, No Ledge, 36W x 60L x 8T, Includes Heavy Duty Stationary "Box"
Design Stand, (HT) (Outside)...Call for Price 
1 ea. Black Granite Surface Plate, No Ledge, 48W x 72L x 6T, Includes Heavy Duty Castered "Box" Design Stand, (Cons. PI) (Bay E)...Call for Price
2 ea. Grey Granite Surface Plate, Two Ledge, 18W x 24L x 4T, (HT) (1 Outside/1 Bay A)...Call for Price
1 ea. Grey Granite Surface Plate, Four Ledge, 24W x 24L x 2.5T, (HT) (Outside)...Call for Price
1 ea. Grey Granite Surface Plate, No Ledge, 30W x 30L x 3T, Has Holes in it, (HT) (Outside)...$50.00
SWEDGERS:
1 ea. Hydraulic Hose Swedger with adapters.
TABLES ROTARY:
8 ea. New and Used Rotary Tables, 6 , 8 , 10 , 12 , 15 , 24 Approx.
1 ea. 10" Rotary Table,
Horizonatal/Vertical, Model T13250B, T13 200/250/300B mm...$550.00 
1 ea. 24" Rotary Table,
Tee Slots 3/4" at Top and 1 1/8" at Bottom, Center is #4 Morse Taper,
comes with (4) Tee Nuts, Note: you can add a motor drive if needed. Height
is 6 1/2". Crating/Shipping cost not included...$750.00 
TRANSFORMERS (LIGHTING):
We have the following New Lighting
Sign France Neon Transformers in stock 
3 ea. Cat. #9060-P5G-2E, Primary 120 Volts, Secondary 9000 Volts...$250.00ea; 3 ea. Cat. #NT912N6G, Primary 120 Volts, Secondary 9000 Volts...$250.00ea; 2 ea. Cat. #12060P5G-2, Primary 120 Volts, Secondary 12,000 Volts...$300.00ea; 6 ea. #12060P5G-2E, Primary 120 Volts, Secondary 12,000 Volts...$300.00ea; 11 ea. #9060P8G-2B, Primary 120 Volts, Secondary 9,000 Volts...$250.00ea; 3 ea. #10000 OE1G, Input 120 Volts, Output 6kv...$150.00ea
TRUCKS:
1 ea. 1998 Mack Flatbed, VIN
#VG6M116AXWB104136, Rear Air Brakes, New Front Disc Brakes and Rotors, 75
Gallon Gas Tank, A/C and Heater Works Good, 24' Foot Steel Bed with 48” High
Corrugated Steel Headache Rack, 32,000 GVWR Derated to 26,000 GVWR, All Tires
11R22.5 1 Front Tire has 1/4” Tread, All Other Tires Have 1/2” to 3/4” Tread,
10 Studs Per Wheel, 261,000 Miles...$8,500.00 
TRANSFORMERS (POWER):
1 ea. General Electric, 100 Inv./Nbr., 45kva, 480/240/120V, 108amps, General Purpose Transformer...$840.00
TUBING BENDERS:
1 ea. Hybend O/D tubing and
Pipe bending machines, makes nice 90 to 180 degree bends on round pipe
or tubing from 1/2" to 2" sizes. Hydraulic, 115 volts, has Castors on bottom
to store out of way while not in use. w/set of dies. Comes with angle measuring
device $3,550.00
1 ea. Used Lenard Mandrell
Tubing Bender, Model 62, 3 sets of tooling, capacity small to max 1-5/8",
will do 2 OD Tubing with (1) set of 1-5/8 Dies...$11,950.00 
1 ea. Lot of Dies for Mandrel Bender, 1 hole most, $140,000 Retail (Lakeland 1995 Price List). $15,000.00
We stock about 20 sets of O/D Tubing dies, from 1/2 to 2" Diameter tubing in various radii.
TORCHES:
1 ea. Oxy acet setup Call 
TURRETS:
1 ea. Enco Bed Turret (Hexturret-The
Better Bed Turret), Serial No. 7064, Designed to fit a 10" Lagun Powermatic
Lathe Model No. 1955L00H, Serial No. 88221, Has 1/2" Albrecth Chuck,
(2) 1/2" Jacobs Chucks, (1) 1" Round Threading Die Holder in Mint
Condition, in 98% New Condition, Rotates to Six Positions, 2 Positions are
Empty...$1,200.00 
VISE:
1 ea. HPAC 160 Angle-Fixed
Compact Vise, opens 9.750"...$749.00 
Selection of USA made Yost
4" vises $195 ea. excellent condition 
W0504 WASHERS PARTS:
1 ea. Parts Washers, KT Fancy blue one with filters $895.00
WATER PUMP:
1 ea. New Apache AGW P30 7hp
3x3 Water Pump, Serial No. A1012002931...$425.00 
WELDERS:
1 ea. Lincoln 225 amp AC Arc
Welder with Leads. $175.00 ea. 
1 ea. 250 Heliarc Welder (L-TEC), Type H-250 HF, Gun, Cables, Wheels,
Flowmeter Regulator with One Gauge, Foot Pedal, 1 Phase, Serial No. B87J-76428
(Cons. CLS...$1,750.00 
WELDERS MIG:
1 ea. Lincoln Electric SP-200
Idealarc with Cart, Regulator and Wire, 1ph, Late Model, Serial No. AC-513033...$795.00
1 ea. Millermatic 250 wire
feed Call 
1 ea. Lincoln SP125 wire feed
1 ea. Aircomatic Mighty IV
Wire Feeder...$450.00 
WELDERS SPOT:
1 ea. Western Arctronics 30KVA
Spot Welder, 230 Volts, 1 Phase, Semi-Automatic, 25 Inch Throat, SCR, Air
Cylinder, Foot Pedal on Cord, 1 Phase, 230 Volt, New Hoses, 24 Inch Arms,
H2O Cooled, Reconditioned by Spotwelder new and rebuilt Company in Los Angeles,
Set Up for Using #1 Tips, Note: SCR=Silicone Controller Rectifier (Big Transister),
No Points to Burn and Cause Bad Welds...$3,250.00 
1 ea. Used Western Arctronics
to be used for parts, same size as above, single phase, no arms, old control,
as is...$850.00 %20001.jpg){kind=small}
%20002.jpg){kind=small}
%20003.jpg){kind=small}
%20004.jpg){kind=small}
WELDING ACCESSORIES:
1 ea. Sumner Clamp Champ makes
pipe welding easy
1 ea. RoToTec Gun, Serial No.
27919...$300.00 
WOODWORKING MACHINES:
1 ea. SCMI Edgebander Model
B 5L, 230v, 60hz, 1750kg, Reference No. 050515, Serial No. AN C04226, as parts
are no longer available we are considering selling the machine complete for
$3,000 or for parts 
WORK HEADS:
1 ea. Vertical Cut-off for a Hardinge Lathe Manual Operated.